Product Details:
Payment & Shipping Terms:
|
Product Name: | GSM Signal Booster | Export Power (Po): | ≥23dBm |
---|---|---|---|
Pass Band Ripple: | ≤3dB | I/O Impedance: | 50Ω/N Connector |
Noise Figure: | ≤4dB | Size: | 220 X 140 X 40 Mm |
High Light: | mobile phone signal repeater,GSM Signal Repeater |
Golden Cell Phone Signal Repeater GSM Signal Booster With 2000m Coverage
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Introduction To Mobile Phone Signal Repeater |
1. Enhance Mobile Phone |
2. Improve |
3. Reduce |
4. Protract |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
2. Features |
High gain, easy installation and operation. |
Full-duplex, single-port design, build-in power supply. |
Use ALC technology, adjust extent automatically |
LED Light Working & Signal Condition Indicators |
Big linear power, control intermodulation & scatteration stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
CE and RoHs Approved |
Technique
Frequency range |
Uplink:890—915MHZ Downlink 935-960MHz |
Gain ( dB) |
Uplink Gp≥65 Downlink Gp≥70 |
Export power (Po) |
≥27dBm |
Pass band ripple |
≤3dB |
I/O impedance |
50Ω/N connector |
Noise figure |
≤4dB |
Transmission Delay |
≤0.5μs |
Ambient temperature |
-10℃~60℃ |
Power supply |
AC110~240V 45~55Hz |
Size |
220 x 140 x 40 mm |
Reliability |
To the GB6993-86 standard |
Electromagnetic compatibility |
To the ETS300 694-4 standard
|
Function |
a) Power supply LED denote b) Export power LED denote |
coverage area |
2000 m2 |
SpecificationsInstallation Sketch Map
Installation Approaches
Technique Supporting
Accessories
SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc